Excellent custom alloy wheels supplier? Due to the current modification of the shops, the original thought that the hub installation of So easy if you do not pay attention to the following installation details, or out of the control: No diameter reducer is installed: the vehicle may have jitters problem during daily running. Dynamic balance weight does not return to zero: when the vehicle is running at high speed, it may shake. No torque plate is used to tighten the hub manually: too loose the hub may be in danger of falling off, too tight may damage the nut/bolt. Tire specifications do not match the hub: tire wear is abnormal, and even the hub can not be installed or there is a rub problem. See extra information on alloy wheels supplier.
Gravity casting wheels:This is the most primitive processing method for aluminum alloy wheels, which can be formed by pouring high-temperature liquid metal into the mold and cooling it. This method is efficient and low cost, but the uniformity of each part of the manufactured wheel is poor, and the molecular density is relatively low, resulting in low strength, so it is not very suitable for high-strength use of passenger vehicles.
Cast aluminum wheels ultimately need to be processed by CNC machine tools, so no matter the roundness, end direction and radial accuracy of the wheels, they are not comparable to traditional rolled steel rings. The dimensional accuracy of the wheels directly affects the driving performance of the vehicle. Especially for high-speed vehicles, it is more prominent, such as the grip, yaw and stability of the whole vehicle during driving, and braking in case of an accident. The high speed and smooth driving of the car.
Fuel vehicle: If you use fully synthetic engine oil, a small maintenance every 10,000 kilometers, a single cost of 600 dollar, then 100,000 kilometers need to be maintained 10 times, the total cost is 6,000 dollar, a major maintenance every 30,000 kilometers, a major maintenance Counting 1,000, 100,000 kilometers of maintenance 3 times, the cost is 3,000, so calculated, the total maintenance cost of 100,000 kilometers is 9,000 dollar.
The advantages of alloy wheels are light weight, high manufacturing precision, high strength, low inertial resistance, strong heat dissipation capacity, good visual effects, etc. The disadvantage is that the manufacturing process is complicated and the cost is high. The aluminum wheel hub is the product of “lightweight”, “high speed” and “modernization”, because it has many characteristics that are unmatched by steel wheels: Light weight and obvious energy-saving effect: It is well known that reducing the weight of the vehicle can save fuel, and the wheels located in the driving part with the lowest center of gravity of the vehicle are even more important to reflect the energy-saving effect of the vehicle.
JWHEEL alloy wheel manufacturers adopt the industry’s advanced casting, spinning, machining, painting and inspection equipment, and at the same time, it is equipped with fully automated robot operation platform and testing equipment to fully meet the product requirements of major high-end customers. The company also sets up a professional team for new product development, design, mold manufacturing, trial production, testing and inspection to provide customers with technical development and support services. Find even more info on https://www.jjjwheel.com/.