Customized led flood light supplier today: Buyers must thoroughly consider the LED roadway light case design before purchasing. An intelligent design can prevent various failure scenarios, such as water entrapment, grounding, and heating. The material used as LED roadway light casing should be consecutive to dissipate heat and have holes to allow water to drain in case water finds its way into the circuit boxes. Grounding is also necessary to avoid electric shock and can be required by any local regulating body. See extra details on led street light manufacturers.
Floodlights and their constituent elements should conform to environmental and safety regulations. The International Football Federation FIFA has strict Quality Assurance guidelines for installing floodlights in stadiums regarding their luminance and luminance uniformity. Floodlights with ENEC, CE, RoHS, ISO9001, ISO14001, ISO50001, and ISO45001 certifications align with many government regulatory and organizational requirements. Flood lights are usually encased in aluminum or stainless steel bodies, which protect them from harsh weather conditions, and are known for their durability over extended periods. The transparent cover is made of tempered glass, which protects in case the glass fails.
IK stands for Impact-Kinetic. Similar to ingress protection, impact protection, or the IK rating, also tells a big story in a number. If an LED roadway light manufacturer mentions an IK09 rating in its product specs, the product has an impact resistance of 10 joules. It is equivalent to a 5-kg object dropping from 20cm in height. A typical roadway lighting LED consists of aluminum as the base material and acts as a heatsink. However, thermal pastes and pads play a vital role in ensuring the heat is conducted from the LED chip to the case and the driver and adequately dissipated to the environment. High-end street lights use high-quality and adequate quantities of thermal paste and padding underneath the substrate or PCB to ensure proper heat transfer. Similarly, the driver is also thermally bonded with the casing through adhesives, pads, and thermal pastes. There are a couple of things to look for in an LED roadway light: the body should be made of high-conductivity material, the design may include a fin-like structure outside, and all the heat-generating components should be heatsinked appropriately.
Tube Lighting is also commonly known as LED fluorescent tube, LED tube lamp, etc, and its light source uses LED as the illuminator. The traditional fluorescent tube is also called a fluorescent lamp. There is a filament at each end of the lamp. The tube is filled with a small amount of argon and thin mercury vapor. The inner wall of the tube is coated with phosphor, and the gas between the two filaments emits ultraviolet light when it conducts electricity. Let the phosphor emit visible light. Due to the heavy metal pollutant “mercury”, the environmental pollution of scrapped fluorescent tubes is very serious.
Our LED light fixture can be divided into indoor LED lighting and outdoor LED lighting according to the place where LED lamps are used. Indoor lighting requires high brightness, good color consistency, high color rendering, and high versatility. Outdoor lighting requires high brightness, long life, and good resistance to harsh environments. Our LED lamps feature high luminous efficiency, low energy consumption, long life, safety, and environmental protection. They can operate for more than 50,000 hours without failure, widely used in factories, warehouses, shopping malls, roads and other public places that require long-term lighting.
Because the LED garden lamp has the characteristics of versatility, aesthetics, landscaping and decorating the outdoor environment, it is also called landscape LED garden lights. It has the characteristics of energy-saving and high efficiency. It is mainly used for lighting up the urban slow lanes, narrow lanes, residential quarters, tourist attractions, public places such as parks and plazas, which can extend the time people spend in outdoor activities and improve the safety of properties. Applicable occasions: Widely used in urban roads, parking lots, bicycle lanes, gardens, plazas, residential areas and other outdoor venues.
The solar road lighting is powered by a crystalline silicon solar cell. The maintenance-free valve-regulated sealed battery (colloidal battery) Sealed Lead Acid is exceptional in storing energy. The super bright LED lamp is used as a light source and is controlled by an intelligent charge and discharge controller, replacing the traditional utility electric lighting. Outdoor solar street lamp is to convert sunlight collected during the day into electric energy for storage, and then use the stored electric energy as LED lighting at night. See extra information on https://www.chz-lighting.com/.
The module LED street light source area is large, the light is uniform, and the illumination range is wide. Modular LED street lights can flexibly design the number of modules according to requirements, reasonably allocate the number and spacing of modules, and have a larger dispersion surface. Therefore, the light source area is relatively large and the light output is uniform. Module LED street light has good stability Module led street lights can be configured with high-quality driving power according to requirements, which will make the brightness, quality and stability of the entire lamp better.
Waterproof problems in the installation of LED street lights: After ensuring the quality of the lamp holder, you need to pay attention to the technical problems of the lamp holder installation and construction. Most of the led street light controllers are installed in the lampshade and battery box, and generally will not enter water, but in actual engineering cases, some are due to improper installation or The circuit board of the controller is not treated with three-proof paint, which will cause a short circuit due to rain water flowing into the led street light controller along the external wiring of the controller terminal. Therefore, during construction, attention should be paid to bending the internal connecting wires of the controller terminals into a “U” shape and fixing them, and the connecting wires exposed to the outside are also fixed to a “U” shape, so that rainwater cannot enter and cause the controller to short circuit. You can also apply waterproof glue on the inner and outer line interfaces to waterproof.
After the lighting renovation of these venues is completed, the lighting effect has been greatly improved, and it has also been highly praised by the teachers and students of the whole school. Next, the CHZ-LIGHTING team will carry out the lighting renovation work of other venues. In the field of sports lighting,CHZ-LIGHTING has accumulated rich experience in stadium lighting projects with the help of high-quality lighting products and professional service capabilities, and has created many classic project cases all over the country. In the future,CHZ-LIGHTING will continue to cultivate with a more professional attitude, constantly temper its own innovation core, and bring a new lighting experience to more stadiums and sports events by creating professional sports lighting lighting design.