Top V-hold Machinery supplier: After 20 years development, V-HOLD has constructed strong hardware facilities and humanized management system by bringing in tens of brand-new large automotive precision CNC machine center from developed countries such as Japan, German, along with over 67,000m2 large modern workshop with complete facilities and production lines, V-HOLD has realized its high efficient production. Besides that, the cooperation with world famous management consulting firm and introduction of modern business administration system such as ERP, 6S have laid solid foundation to the development of V-HOLD. Thanks for the trust and support of our customer. V-HOLD will consistently stick to the belief that: Profession and concentration accomplish excellent brand ! Discover additional info at woodworking machines manufacturer.
The radial arm saw is pretty much a portable circular saw that glides on an adjustable arm suspended over a fixed cutting surface. The blade and motor are connected to the arm by a yoke, which is adjustable along both horizontal and vertical planes, enabling the saw to be swung in a variety of directions. For cross-cut work, position the board flush with the fence at the rear of the saw and draw the blade across the wood. The bevel lock allows the saw to be tilted for cutting angles. You can set it to the desired angle using the protractor on the saw housing. The saw can be swivelled right or left for mitring, or turned a full 90 degrees for ripping. The blade can also be raised or lowered using a crank. The size of the saw is determined by the dimension of the blade the saw can accommodate. As an example a model using a 10 inch blade would be able to cut work-pieces up to 3 inches thick.
Up-acting machines typically apply hydraulic pressure from the centre of the lower beam which pushes the lower beam upwards into a fixed upper beam. Tonnage is applied to the centre of the lower beam in an upward fashion. The flex in the bend tends to be even from left to right. Hydraulics are used to push the lower beam up and gravity is used to return the lower beam down. A loss in power will result in the brake being in the open position. Since the lower beam does move during operation, feedback to the operator is given. Knowing the lower beam is moving can be a safety feature. Down-acting machines are preferred if staged bending is important. Staged bending is a valuable option that can significantly improve productivity while minimising setup time.
A jointer is used for planing straight edges and surfaces of boards. In practice, it performs the work of a hand planer and is capable of producing a true surface with sufficient accuracy and speed. In consists of a frame, table, feed rollers, revolving head fitted with two or three cutter knives. With the help of feed rolls, the plank is fed to the cutter head which removes the wooden chips as the board advances and makes its surface smooth and plane. By means of an adjustable fence, the jointer can also be used for angular and level cuts. A jointer is specified by the length of the cutting blade.
Presses come in various sizes and with various powers/pressures. The presses can be easily adapted to fit a businesses personal requirements. Automated press lines are designed in conjunction with all through-feed press options to be fully automatic or semi-automatic. They can start at the brushing stage where the material is cleaned, through to gluing, pressing then cutting. Modern presses fall into two categories: down-acting and up-acting. A down-acting machine has an upper beam that moves downwards to bring the tooling together. An up-acting machine has a lower beam that moves upwards to do the same. Each machine has its own strengths and limitations.
The band is available in two models, vertical and horizontal. In the former, two wheels are arranged side by side and the table is mounted underneath. In the latter model, Frame illustrated in Fig. 10.55, the wheels are arranged one above the other in a vertical plane below the table and the band passes through the table. As in the case of the circular table, angular cuts are obtained by tilting the saw table. The size of the band saw is specified as the distance from the saw band to the inner side of the frame. The distance is roughly equal to the diameter of the wheels.
The wood is fixed between the headstock and tailstock of the lathe. The headstock houses the motor that spins the work-piece. The tailstock is adjustable, moving along the length of the bed to fit work-pieces of various lengths. Once the work-piece is locked in place, the tool rest is set into position. The spinning work-piece is then shaped using a chisel or gouge held fast to the tool rest. Face-plate turning, in with the work-piece is fastened with screws to the face plate of the drive spindle, allows the woodworker to produce bowls and other hollow goods. Discover even more info at https://www.v-holdmachinery.com/.